Useful Beginner Guide On Hydraulic Hose Fittings

All those type of fittings depend on proper adjustment and tightness to remain fluid tight. One of the most common problems in the hydraulic system is leaking. The sealer ring inside the fitting needs to be change regularly to insure adequate pressure in the hoses.Depending on the kind of fittings used in the hydraulic system, you can go from virtually no pressure to high pressure reaching over 6000 psi. It's useless to say that you have to be extra careful when using machinery that can reach this kind of pressure.

You never know when the seal from one Low Temperature Hose fitting can break and send hazardous fluid flying towards you at high pressure. Like mentioned above, always inspect the machinery properly and stay at a good distance from operating equipment.In closing, it's pretty obvious that having the right kind of hydraulic hose fittings for your equipment is essential. When not familiar with the fitting characteristics of your hydraulic system, a specialist should be consulted.

They often specialize in specific work environment, such as heavy equipment, plumbing, laboratory or automobiles. Even if the fitting are looking alike, they are not built the same way or with the same material. Some are waterproof and others are used for brake fluid. Some are unidirectional and others are bidirectional. You also have to choose the right size, correct material for your fluid temperature, etc. Finally, you have to take into consideration that various brand don't mix.